Continuous Annealing Machine for Copper Wire

• Type: Annealing Machine
• Certification: CE, RoHS, ISO
• Customized: Customized
• Condition: New
• Use Industry: Cable Making Machine
• Industry: Cable Machine
• Model NO.: TH
• Wire: Enameled Annealing
• Specification: L1390*W1500*2H640(mm)
• Trademark: SWAN INT′L
• Origin: Shanghai, China

Product Description

 

TH4000 Annealing machine

Product Description

TH4000 annealing machine is based on the principle of contact short circuit annealing.
The annealing power source is DC, which is suitable for annealing softening of copper wires.
The annealing machine consists of a conductive system, an oxidation protection system, a cooling system, a drying system, and an electrical system.
The oxidation protection method adopts steam protection (a steam generator is attached to the device);the cooling and lubrication adopts the dilute concentration drawing fluid circulation. Generally, a pool or an external heat exchanger is required for cooling (the external heat exchanger and cooling tower are provided by the user);the drying system uses compressed air and a mold to dry.
The cooling water source and compressed air used are provided by the user. The thyristor of the annealing electrical control part adopts the air cooling method.

Detailed Photos

We adopt DC annealing method. Compared with AC annealing, the cable after annealing has better effect. Because alternating current has periodic fluctuations, cables cannot be completely annealed.

Drawing cone with range slip ratio for our machine

The range slip ratio is adopted, and the copper wire will not be fixed to drawing cone with a
fixed position during the machine is high-speed operation. Therefore, the service life of
the drawing cone is increased. The normal service life of our drawing cone is about 12 months.
 

 

Product Parameters

Name	Parameters
Annealed wire diameter range (mm)	1.7-2.76
Max Mechanical speed (m/min)	600
Rated DC annealing current (A)	4000
Max.DC annealing voltage (V)	60
Annealing capacity (KVA)	260KVA
Steam generator power (KW)	18
Amount of steam (kg/h)	12
Dimensions (mm) LxWxH	3350*1600*2640
weight (kg)	About 2800
Compressed air:
Working pressure	0.6-0.7 Mpa
Fluctuation value	+0.02 Mpa
Dew point	-25ºC
Flow	200 L/min
Water requirements:
Working pressure	0.2-0.4 MPa
Temperature	≤25 °C
Steam generator water hardness	max 5 dH
Annealing machine cooling water hardness	max 12dH
PH	7~8
Flow	420 L/min
Note: The cooling water must not contain suspended matter, minerals, metal impurities, insoluble and corrosive substances
Power supply:
Three-phase voltage	~3x380 VAC (±10%)
Single-phase vottage	~220VAC(±10%)
Power frequency	50 Hz (±2%)

Other Details

Main component selection: 

(1)Annealing controller uses annealing specific products: 

(2)The low-voltage electrical components are made by Schneider France, the bearings are made of NIN or NSK in Japan; the oil seals and the readings are made in Taiwan or South Korea; 

(3)The conductive ring is made of a nickel alloy material; 

(4)The guide wheel is sprayed with ceramic: 

(5)The transmission flat belt is made of Swiss brand.

Packaging & Shipping

Company Profile